- Ethernet works but not WiFi in Windows 11/10
- How can I switch from Ethernet to wireless network?
- Which is safer Ethernet or Wi-Fi?
- What do I do if I don’t have a Wi-Fi adapter on my desktop computer?
Internet connection issues are common with Windows but imagine a situation in which your Ethernet cable works, however, the Wi-Fi adapter doesn’t. If you encounter this problem on your system, then please read through this article for the causes and resolutions.
Ethernet works but not WiFi in Windows 11/10
The causes could be either the adapter or some other software setting on the computer. In either of these cases, you can try the following solutions sequentially:
- Check if your computer supports Wi-FiCheck for a physical Wi-Fi switch on the keyboardMake sure your system is in the range of the wireless networkCheck if the wireless adapter is EnabledCheck if the Wi-Fi network is connected or notRun the Network Adapter troubleshooterUpdate the Network driversTurn OFF the anti-virus and Windows Defender Firewall temporarilyPower-cycle modem, router, and computerRelease IP address.
1] Check if your computer supports Wi-Fi
2] Check for a physical Wi-Fi switch on the keyboard
Many computers come with a separate Wi-Fi switch on them. Check if your keyboard has one. Rather most keyboards have an option whether the Fn key is used along with another Function key to switch the Wi-Fi adapter ON or OFF. Press the combination once to check if it fixes the problem.
3] Make sure your system is in the range of the wireless network
Unlike an Ethernet cable, the range of a wireless network depends on the distance from the router. If your system is placed in a different room with thick walls, then you can use a wireless extender to extend the range of the router. Otherwise, you can buy a stronger router.
4] Check if the wireless adapter is Enabled
It is important to check whether the wireless adapter is Enabled. You can verify this as follows:
5] Check if the Wi-Fi network is connected or not
Unlike the ethernet cable, the Wi-Fi network necessarily needs a password to connect. It should specifically be marked Connected when you check the Wi-Fi symbol. In some cases, it is merely marked as secured.Try clicking on the network and entering the password once again.
6] Run the Network Adapter troubleshooter
The Network Adapter troubleshooter checks for problems related to the network adapter and resolves them if possible. The procedure is as follows:
Let the troubleshooter do its job and check if it resolves the problem.
7] Update the Network drivers
Windows Update is probably the most efficient way to update network drivers in Windows 11. Whether it is a Wi-Fi driver or Ethernet driver, you can use the Windows Update to download and install the pending updates. The best thing is that you can download such updates manually. To update Network drivers in Windows 11 using Windows Updates, follow these steps:
The procedure is as follows:
At times, an overprotective anti-virus or Windows Defender Firewall can prevent access to the wireless network. In this case, you can turn these OFF temporarily to isolate the cause. In case of third-party anti-virus software products, please contact the product manufacturer. Then you can turn OFF the Windows Defender Firewall. You can also turn OFF Windows Security.
Later, remember to turn all these options back ON.
9] Power-cycle modem, router, and computer
In the case of wireless networks, it is quite common for the system to pick an APIPA IP address. In this case, the resolution can be power cycling the modem, router, and system. The procedure is as follows:
10] Release IP address
The last solution will be to release and renew the IP address of the system. The procedure is as follows:
Search for Command Prompt in the Windows Search bar.
Click on Run as administrator in the right pane to open the elevated Command Prompt window.
Type the following commands and hit Enter after each command to execute them. to change the IP address:
Reboot your system after these commands have been executed. Then check if it resolves the problem.
Fix: Network & Internet connection problems in Windows
How can I switch from Ethernet to wireless network?
The simplest method to switch from Ethernet to wireless network is to simply unplug the Ethernet cable. The other method is to connect to the wireless network from the list of networks and select it as the preferred one. If you wish to disable the Ethernet network for long term and make sure that your system only picks wireless networks, then disable the Ethernet network from the Network Connections window.
Which is safer Ethernet or Wi-Fi?
Ethernet is usually considered safer than Wi-Fi because it needs to be connected physically. On the other hand, Wi-Fi uses advanced security standards for securing the password. However, it still won’t be as safe as a physically connected cable. Nonetheless, newer Wi-Fi standards are very safe.
What do I do if I don’t have a Wi-Fi adapter on my desktop computer?
If your desktop computer does not have a Wi-Fi adapter, you can use an external Wi-Fi adapter which can be connected through the USB. However, the speed of the network will depend on the bottleneck and thus it is advisable to use the newest standard of USB connectors.
Keyword: Ethernet works but not WiFi in Windows 11/10>